ClearView AlgaeCure Black Algae Killer Granular Trichlor | 2lb | CVTC002

The ClearView AlgaeCure Black Algae Killer Granular Trichlor CVTC002 is a highly effective algaecide designed to eliminate black algae infestations in swimming pools, especially those with white plaster surfaces. It contains 99% trichlor, making it a powerful treatment for both black and green algae while also serving as a super chlorinator for pool water. This product is ideal for maintaining a clean and sparkling pool, helping to ensure safe and sanitary conditions by removing tough algae build-up. The granular formula is easy to apply and works efficiently for super chlorination and algae control​.

• High Potency: Contains 99% trichlor, making it a highly concentrated solution for both black and green algae removal. This powerful formula provides thorough and lasting treatment, ensuring effective algae control for your pool.

• Versatile Use: Serves as both a potent algaecide and a super chlorinator, helping to maintain clean, clear, and safe water. This dual action makes it an essential addition for regular pool maintenance and sanitation.

• Ideal for White Plaster Pools: Specially designed for pools with white plaster surfaces, it effectively targets stubborn black algae infestations. This makes it a reliable choice for achieving a sparkling, algae-free pool environment.

• Easy Application: The granular formula allows for simple, even distribution across the pool surface. This ease of use ensures efficient super chlorination and comprehensive algae control without complicated handling.

• (1) ClearView CVTC002 AlgaeCure

Ingredients

• Trichloro-s-triazinetrione 99%
• Other ingredients 1%
• Total 100%

Elimination of Existing Algae Growth: this product is highly effective for control of black and green algae infestations and will aid in the removal of algae only when pool or spa is not in use. Repeat treatment whenever visible algae growth occurs. Turn off filter and pump prior to application and keep off for at least 8 hours after treatment.
1. Brush algae spots on walls and bottom with a recommended algae brush.
2. Sprinkle this product directly over pool or spa walls and/or bottom where algae growth appears.
Use approximately 16 ounces of this product per 10,000 gallons of pool water. For spas, use 3/4 - 1 ounce per 500 gallons. For heavy algae growth, dosage may be doubled.
3. Brush algae spots again with a recommended brush and vacuum debris to waste

Superchlorination:

Swimming pools and spas should be super chlorinated once each 7-10 days when not in use, after rain or dust storms, during hot weather, and whenever water is cloudy or floating algae appears on the water surface. Broadcast 7 1/2 to 15 ounces of this product per 10,000 gallons pool water over the deepest end of the pool. For spas, use 3/8 to 3/4 ounces of this product per 500 gallons. Spread evenly over water surface of spa.

After Treatment:
1. Measure pH of swimming pool or spa water immediately after application. Use a reliable test kit. If necessary, adjust and maintain pH within 7.2 - 7.6 range. pH Down (dry acid) lowers pH. pH Up (soda ash) raises pH. Follow directions for use contained on the labeling of these products.
2. Reentry into treated swimming pools or spas is prohibited above levels of 3.0 ppm available chlorine.

Note:

• Do not use in vinyl liner pools, painted pools or colored plaster cement pools. For white plaster pools only.