ClearView Filter Aid Pool Filter Cleaner | 32oz | CVLFAQT12

​ClearView Filter Aid Pool Filter Cleaner CVLFAQT12 is a professional-strength solution designed to remove oil, scale, and organic grime from sand, cartridge, and diatomaceous earth (DE) filters. Regular use enhances water flow, prevents cloudy water, and extends the life of your pool or spa by maintaining cleaner water and improving overall water quality. This 32-ounce bottle provides an efficient and convenient method for routine filter maintenance.

• Professional-Strength Formula: Effectively removes oil, scale, and organic grime from pool filters.

• Versatile Compatibility: Safe for use with sand, cartridge, and diatomaceous earth (DE) filters.

• Enhances Water Flow: Improves filtration efficiency to prevent cloudy water and maintain water clarity.

• Extends Filter Life: Regular use helps prolong the lifespan of your pool or spa filtration system.

• Convenient 32-Ounce Bottle: Provides an easy and efficient solution for routine filter maintenance.

Directions

• Shake thoroughly before using.

Cleans Sand Filters

• Turn off inlets and outlets for all chemical feeders.
• Close the main drain and place the filter in backwash position.
• Slowly pour 8 ounces of ClearView Filter Aid through the skimmer while backwashing.
• Run the filter pump until the water runs clear.
• Repeat treatment until the entire bottle is used.
• Resume normal operation and turn on inlets/outlets for chemical feeders.

Cleans Cartridge Filters

• Remove the cartridge from the filter.
• Spray ClearView Filter Aid from top to bottom on the filter.
• Allow to stand for 5 minutes or until foaming action stops.
• For deep cleaning:
  • Place cartridges in a large plastic bag.
  • Tie the bag closed.
  • Set in a warm area for 30 minutes.
• Rinse and replace the cartridge in the filter.
• Resume normal operation.

Cleans Diatomaceous Earth Filters

• Remove filter grids from the filter.
• Spray ClearView Filter Aid onto the grid surface.
• Allow to stand for 5 minutes or until foaming action stops.
• For deep cleaning:
  • Place grids in a large plastic bag.
  • Tie the bag closed.
  • Set in a warm area for 30 minutes.
• Rinse and replace grids in the filter.
• Resume normal operation.